STAR TRACE Heavy-Duty Vibro Motor Powered electromechanical feeders are high frequency reciprocating machine of heavy duty capable on conveying bilk material from storage to processing or between processed at a continuous controlled rate flow.
Electromechanical feeders are used in processing industries for handling all type of materials such as hot, damp, lumps, dusty or abrasive for various functions like flow of material from storage, proportioning and blending, packaging, mixing, weighing, sprinkling, screening, scalping, crushing, washing, drying, heating, cooling, dusting, spreading, batching and etc.
The most distinguishing property of Roll Magnetic Separator is the used magnets that are an alloy of rare earth elements produced domestically and more powerful. Magnetic Systems has a number of standard sizes in which the high gradient separator is produced, and all of these sizes only require a low installation height. It is also possible to make a system in accordance with customer specifications. Depending on the requirements made and the application, a choice can be made for a single stage system or for multiple magnet rolls under one another. This results in an even higher degree of iron separation.
Electromechanical feeders can be supplied with base mounted over hanging or combined single motor drive or with twin dual or Dual twin motor drive or with multiple drives to serve as vibrating conveyors. These electromechanical feeders are having a tray mounted on the drive units. This drive unit is located beneath the tray.
Vibratory Motors used in Vibro feeders are totally enclosed 3 phase, squirrel cage induction motors with adjustable, eccentric weights mounted at the both the end of the shaft to set up vibrations during rotation. The design of shaft and the selection of bearing has been carefully done to withstand heavy radial loads. Two identical motors mounted parallel to each other on a right and left, which is free to move in all directions, will produce linear vibrations. When connected for contra-rotation so know this principle is adopted for handling large bulky material in large feeders.
This vibratory motor stator frame is fabricated in steel or cost in spheroid graphitic iron and the windings/connections are properly reinforced to with stand the heavy vibrating forces. Vibrator motors can be adopted for conveyors and electromechanical feeders for handling large quantities of materials is moved by linear force along with conveyor. Usually vibrator motors are fixed at an angle between 30° to 45° to the plane of the conveyor. This gives the system both upward and forward motion and horizontal vibrations to the tray which ensures a free, smooth, uniform and volumetric flow to the material that is fully variable.
Heavy –Duty Vibrating Feeders are available in a variety of trough size and shapes as per IS:8723 –1978. The vibratory tray is heavily fabricated duly stiffened with angles wear resistance plate can also be provided in the tray for varying abrasive materials. Tray can be made to suit individual's requirement. This can be made dust tight too.
|Technical Specification for Electromechanical Feeder|
Width x Length
TPH for material weighing
(100 Lbs/cu.ft) 1600 Kgs/cu.mt
|VIBRO 101||315 x 500||1||175|
|VIBRO 202||400 x 750||2||300|
|VIBRO 303||630 x 780||3||475|
|VIBRO 310S||800 x 1000||10||500|
|VIBRO 420SS||1000 x 1250||20||550|